What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 01.07.2025 13:43

He then describes the function of a fuse.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I dreamt my mother had died and I cried so much in my dream. What does it mean?
This is where the MOV conducts again, and dissipated the energy.
(Dc diagram shown, AC is similar).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Can you DM your uncle’s wife for a video?
a photo is worth a thousand words.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
AMD CEO Su turns heads with comments at AI event - TheStreet
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The bolt then partially travels down the line to your home.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Salary you need to live comfortably in Virginia in 2025, according to new study - 13newsnow.com
The MOV will conduct when the voltage exceeds 50% of line voltage.
the problem then depends on "how fast does the fuse operate?".
There are three different concepts here that are getting confused.
7 Surprising Home and Garden Mistakes That Could Be Making Your Allergies Worse - Yahoo
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes Rainy Season and Lightning.
These devices are installed between the “hot” and “neutral” and protective ground.
Algorithm to analyze smartphone app data can predict MS symptoms - Multiple Sclerosis News Today
These are simplified answers to the original question, and does not change anything I wrote above.
nine
At one ohm, the resistor has a maximum of 1 watt power.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But it can get overloaded, and no longer works.
Despite practicing at CB and WR, Bo Melton won’t compare himself to Travis Hunter - NBC Sports
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
It also is a device that limits the change in current flow.
I post the exact comment here.
Which country do you recommend for me to live in, England, the USA, Italy, Spanish, or Austria?
This device then solves the entire problem.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What is lightning?
2025 NBA Finals MVP Rankings: Shai Gilgeous-Alexander, Tyrese Haliburton and More - Bleacher Report
It seems Mohan does not understand the difference between a comment and an Answer.
eight
Upvotes:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
For this case there are devices called Metal oxide varistors (MOV).
[old diagram got deleted by accident]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–10[John johnson John Johnson ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is 'the assistant's answer'
2024–10–14 [Omar Gharbi Omar Gharbi ]
A fuse is a non-resetable over current circuit protector.
One
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The third is lightning and “how it gets conducted into a home.”
He then asserts :
First Sentence:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
What does a fuse do?
So, the voltage could go up to 500 volts, and the fuse will not open up.
Barnstars:
In schematic diagrams this is the symbol for a fuse:
2024–10–16 [ OO OLAOYE OYEBODE ]
Edit 2024–10.
The other is “what does a “fuse” do?”
A circuit breaker is similar, but is resettable.
Now when you have a certain ac resistance, then a current flows in a loop.
This is where this question deviates from being a 'generic' question, and becomes more specific.
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
One is “what exactly is in a ‘surge protector’ ? ”
Here is a simplified AC power diagram.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
There are two important concepts here.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This one hit behind the barn.
but I think this circuit , shows a few more pieces.
but this device (an Inductor) … impedes the rapid changes in the current.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At least they know the answer if they wanted it.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
An AC voltage/ current source, and an ac inductive load.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, what happens?
what exactly is a ‘surge’ protector?